• 300 Pennsylvania Ave NW, Washington, DC 20006, USA

Full automatic high speed double side lamination hydraulic rodless lamination compounding machine

Rated 4.00 out of 5 based on 5 customer ratings
Category:

Product description

Machine brief description

High speed Lamination Machine uses lamination grade LDPE,LLDPE、PP、EVA、EAA as coating material,mainly designed for paper double side coating, real production speed can reach 180M/Min.

Entire Machine control by PLC, weight more than 50Tons, to ensure machine stable while running at 180M/Min.

 

 

 

Machine Compounents

  1. Double Station Un-Winder
  2. Auto-Splicer
  3. Automatic-EPC
  4. Traction
  5. Corona Treater

(After treating can increase compounding ability)

  1. Extruder

(With Static Mixer,T-Die Extrusion,ensure stable flow and extrusion coating)

  1. Three Roller Compounding

(Big Diameter Chill Roller, Double Jacket with Inner Spiral flow)

(Different Toughness standard of Silicon roller for different usage)

  1. Trimming Collection

Double Station Winder(Automatic Cutting and Changing)

Highlight

  • Thickness Automatic Setting

Compounding Part Process and Speed Showing、Screw Rotate and Speed Showing、Extruder & T-Die Temperature Setting and adjusting, entire machine speed adjusting all in Center Control PLC。Pre-Load your process data in Touch Screen(Paper Width、Lamination Thickness)can allow you to work with Synchronization of Compounding Speed、Screw Speed and Thickness of Automatic calculus accurate(For Example: Paper Width 1000mm,lamination thickness 20µm,Set above data and choose Synchronization Calculation On,Then entire machine running you only need to press speed up or speed down button,to make product in precision automatic control, and can make sure thickness remain even while speed down or up),also you can work with separate control

 

  • Double Side Coating

Instead of coating one side and take paper roll to coat again on the other side by two step. This way will cause tension change and inevitably cause paper waste(Please note paper after coating is not recycable). Double Side coating machine can do double side coatin in just one process so avoid tension problem and wastage.

 

 

  • Auto-Splicer

For Super Speed model working speed is too fast, almost every 8-15 minutes will require to change another roll of paper, auto-splicer can change paper rolls automaticly in high speed process with minimum wastage.

 

  • Automatic Tension Control

With Linear Positioner and Precision pressure regulating valve) to sense tension, adjust by PLC close loop tension control.

 

  • Automatic EPC

Brushless dc push rod drive rectifying control system,Moving distance ±75mm,Motor control by Controller,Acoustic sensors on edge,high precision automatic edge matching.

Product parameters

Model BJLM1300/100×2 BJLM1600/105×2
Screw Diameter φ100 mm φ105 mm
L/D 33:1 33:1
Product Width 600-1200mm 800-1500mm
Coating Thickness 0.01-0.10 mm 0.01-0.10 mm
Coating material (Lamination Grade) LDPE、LLDPE、PP、EVA、EAA LDPE、LLDPE、PP、EVA、EAA
Designed Line Speed 210 m/min 210 m/min
Max Extrusion 300kg/h 330kg/h
Main Motor 45 kw 55 kw
Total Power 155kw 180kw
Main Un-Winder ≤φ1500 mm ≤φ1500 mm
Winder ≤φ1300 mm ≤φ1300 mm
Weight 15000kg 17000kg
Overal Demension 15000×8000×3200 mm 15000×10000×3200 mm
Power Supply 380V/3P/4L/50Hz 380V/3P/4L/50Hz